When it comes to calibration, we provide free calibration service to our customers under certain conditions. For all others, we are providing at a nominal cost.

As you know, powder coatings are free from Volatile Organic compounds and are eco-friendly. The conventional liquid paints are made up of VOC. Furthermore, when it comes to applications, conventional paints take much time for finishing comparing to powder coatings.

Yes. We can help the customers who are willing to start Powder Coating Units. Utilizing our experience and expertise in the powder coating industry, we could able to give insights and guidance.

It is purely depends on sizes, consumables and equipment that you are interested. For example, for an oven size measuring, 6 ft Breadth, 8 ft height, and 12 ft length with standard accessories like Gema Gun or Wagner Gun, 5HP Compressor, and trolleys, it costs around 10 Lakhs. If you are planning to go for a conveyor type oven, it will cost you more. If your purchase local-made powder coating gun, it costs half of the price when comparing to Gema or Wagner. So, on the whole it depends on what product you choose.

Pin holes commonly happen because of the compatibility issues (mixing of powders, contaminations, etc.). In glossy finish when the product is coated with more than 100 microns, there will be a possibility of micro pin holes. In structure finish, when coating thickness falls below the recommended thickness level it leads to pin holes.we recommend to have a minimum thickness of 80 microns on structure finishes.